Changsha DLADTO Rebar Splice Co., Ltd

Rib-peeling straight threaded connection   is a new type connection technology. Steel sleeves can be divided into: threaded steel sleeves and straight threaded steel connecting sleeves, which are mainly used in the pavement of municipal bridges and highway bridges, the renovation of old bridge decks, and the crack prevention of bridge piers. Through the quality inspection of thousands of bridges in China, the report shows that using steel sleeves to connect steel welded wire mesh and steel welded mesh can improve the quality of bridge deck pavement, the pass rate of protective layer thickness reached 98%, the paving speed is increased by more than 50%, and the construction cost of bridge deck paving is reduced by about 10%. Changsha DLADTO Rebar Splice Co., Ltd  is a professional rebar coupler producer, we have been in this field for a long time with customers for all over the world. If you have any inquiry, welcome to contact us.

Rib rolling threaded rebar coupler   connection is a new type of steel connecting sleeve technology. Its structural principle is to peel off a part of the longitudinal and transverse ribs at the end of the steel bar, and then roll them into a ordinary bar after connected, use a special straight-threaded steel bar connecting sleeve to connect them.  It can be operated flexibly in narrow place. Convenient construction and high efficiency: steel bar connection sleeves are prefabricated in the factory. Quality assurance: on-site rolling wire head equipment can process nearly 400 joints per shift, which has unparalleled advantages in the construction of large quantities. No pollution during construction, safety and environmental protection, and can be work in all weather. Changsha DLADTO Rebar Splice Co., Ltd  is a professional rebar coupler producer, we have been in this field for a long time with customers for all over the world. If you have any inquiry, welcome to contact us.

Features of   HGS-40DZ thread rolling machine : 1. The motor of HGS-40DZ thread rolling machine is a 4KW copper core motor. 2. The reducer is a star cycloid reducer with a speed ratio of 1:19. 3. The clamp seat is made of fine cast steel, which is affordable and durable. 4. The feeding mechanism adopts single-gear rack and pinion sliding type feeding. 5. The machine adopts automatic circulation of cooling water, and the water pump is equipped with a stainless steel wire mesh sleeve to protect the water pump. 6. The electrical control realizes automatic control. The whole processing process does not need to press the button switch, and all the processes of automatic opening, reversing and parking are realized. 7. The rolling wheel is divided into two types: 16~22 and 25~32. It is convenient and quick to adjust the rolling wheel according to the steel bar specifications within the same processing interval. 8. The machine head screw is specially customized by the manufacturer, with a stre