Changsha DLADTO Rebar Splice Co., Ltd

Cold extrusion rebar coupler   is a connection method that put steel bars inserted into the two ends of the extrusion sleeve and connected by a cold extrusion machine. Technical introduction 1. Using No. 20 carbon structural steel, the dimensional accuracy is high and the connection quality is reliable. 2. The basic parameters of sleeves in various specifications are all structurally designed according to the strength requirements of HRB500 steel bars, and are applicable to HRB335, HRB400 and HRB500 steel rebars. 3. The performance indicators have been tested by the "National Construction Engineering Quality Supervision and Inspection Center", and all meet the requirements of "I" level joints in JGJ107-2010. 4. The specifications are matched with the diameter of the steel bars to be connected, and are divided into ten specifications: φ14mm, φ16mm, φ18mm, φ20mm, φ22mm, φ25mm, φ28mm, φ32mm, φ36mm, and φ40mm. Changsha DLADTO Rebar Splice Co., Ltd  is a professional reb

We must pay attention to the installation when using   straight thread rebar coupler   to avoid technical problems, which may affect the quality of the product. Installation steps of straight thread rebar coupler: 1. Reinforcement in place: transport the rebar that has passed the wire head inspection to the construction for connection. 2. Tightening: Use the wrench to tighten the straight thread rebar coupler. 3. Marking: Mark the tightened sleeve to distinguish it from the untightened sleeve. 4. Construction inspection: quality inspection to the finished joints. 5. Binding the rest steel bars. Changsha DLADTO Rebar Splice Co., Ltd  is a professional rebar coupler producer, we have been in this field for a long time with customers for all over the world. If you have any inquiry, welcome to contact us.

The   rebar socket working wrench   is made of 45# steel, which can tighten the steel of φ16-φ40MM. It is easy to use and fast to tighten. It is a common tool that used in rebar coupler works. Material: Tool Steel Model: 34/80*650 Wrench shape: single-ended wrench Surface treatment: spray paint Weight: 2000 (g) Changsha DLADTO Rebar Splice Co., Ltd  is a professional rebar coupler producer, we have been in this field for a long time with customers for all over the world. If you have any inquiry, welcome to contact us.

  Features of   HGS-40KZS threading roller machine : (1) 5.5 kW copper motor. (2) Over size stage on the front of the machine and make the slider thicker. (3) No. 5 reducer. (4) New type quick adjustment head. (5) Weight 500KG. (6) The opening method of the positioning plate is the pulley bearing key strip opening method, so it is much stably. Changsha DLADTO Rebar Splice Co., Ltd  is a professional rebar coupler producer, we have been in this field for a long time with customers for all over the world. If you have any inquiry, welcome to contact us.